Changzhou Zhongke Gearbox Manufacturing Co., Ltd.:Introduction to the simple knowledge of gearbox transmission parts

The gearbox is the main transmission component of the wind turbine. The gearbox is mainly located between the sub-wheel and the generator to transmit power to increase the speed. It is a heavy-duty gear transmission device that works under the action of irregularly changing directions and instantaneous strong impact loads. 

As a power transmission component, the gearbox bears both dynamic and static loads during operation. The dynamic load partly depends on the characteristics of the wind turbine and generator and the quality, stiffness, damping value and other conditions of the drive shaft and coupling. Therefore, it is necessary to establish a corresponding calculation model to obtain the design load of the parts, and use this as a basis to calculate the strength of the main parts of the gearbox. 

Gearbox lubrication is very important. Good lubrication can sufficiently protect gears and bearings. For this reason, we must attach great importance to the lubrication of gearboxes and keep the lubrication system in the best condition for a long time in strict accordance with the specifications. Gearboxes often use splash lubrication or forced lubrication. Gearbox lubricants should not only protect gears and bearings, but also have the following properties: reduce friction and wear, have high load-bearing capacity, and prevent gluing; absorb shock and vibration; prevent fatigue pitting; Cooling, anti-rust, anti-corrosion, etc.
For more information, please follow the official website of Changzhou Heavy Industry Gearbox Manufacturing Co., Ltd.: http://www.zkgearbox.com